Thanks in advance. Nach oben. I think you have to try if it works for you. Regards, Happy. You can see the firmware version used by the forum members in their signature mostly. Aug , Thank you for your If I check the details of the smart card via the receiver menu I see that the encryption type is unknown Should'nt the receiver recognize it as Mediagard? Thanks to all! Mickha Super Moderator Staff member. I know this might sound a stupid question but have you got the card inserted the correct way up?
If you have already tried this and it doesn't work please post back and I'll search if anyone has an official Canal Digitaal official smart card working in a Diablo cam. Thanks Mickha I have tried to re-insert the card and so on but it does not help I have also tried to change some CAM settings but I could not find what you advice. I've been offline, thanks to my ISP, for 12 hours.
Hopefully one of these options might work with your card. Have you got the card inserted with the chip facing up? You could also try a search of the internet to see if anyone has this card working with this cam, and what file and settings they are using. Sorry Mickha for not replying earlier Goto Ref: dreht den Motor in die Referenzposition. Page 43 4. Dieser Menupunkt wird zum Drehen des Satellitenspiegels zu den gespeicherten Satellitenpositionen vewendet.
Der max. Mit Sichern konnen Sie die Anderungen abspeichern. Sie sollten die einzelnen Parameter vorab wissen und entsprechend eingeben. Page 47 4. Die Werkseinstellung besteht aus zwei Schritten. Wiederherstellung Alle gespeicherten Daten und Systemeinstellungen werden wiederhergestellt, falls diese vorher mit der Sichern Funktion abgespeichert wurden.
Die Werkseinstellung werden hieraufhin wiederherstellt. Dieser ist nicht der allgemeine PIN. Page 51 4. Die Taste erlaubt den Aufruf weiterer Informationen. Mit der Taste wird der Videotext aufgerufen. Page 57 5. Art des Missbrauchs: Spam.
Display the XSCF firmware version, and confirm it. In the window, match the version of the current firmware. In this case, the firmware is not updated automatically. The operator must perform a update to match the number of the firmware versions. Turn on power to the server after completing the Motherboard unit replacement task.
If the system hangs or any of the messages shown below is output during the firmware update, the XSCF Unit on the faulty side cannot be used and is treated as a faulty component. Try the firmware update again when an error occurs while updating the XSCF firmware.
The second attempt may succeed where the first failed. Error involving a failed write or reset operation on the standby or active side. Error involved a failed write or reset operation. When the firmware update of the standby side is completed, the standby side that has new firmware is switched to the active side.
Yes, it can. By specifying all domains in the poweron 8 command, the new firmware can be applied simultaneously to all the domains.
Log information for the XSCF firmware is used for investigating hardware or firmware faults. When the log archiving function is enabled, logs are stored on the archive host see Section 8. The logs include the following types:. If a failure occurs in the system, the system and XSCF collects some fault information logs. TABLE lists the types of logs that are collected, descriptions, and reference methods. Log for error events, notifications and faults occurred in server. The display form of the log is interchangeable on the Oracle Solaris OS.
Log information is the same as the FM log. The display form of the log is peculiar to the platform. Log for recording output Oracle Solaris OS messages. If a failure occurs, an outline of the failure is output. Oracle Solaris OS commands are used to refer to the logs.
Log for recording messages, from the XSCF firmware, reporting abnormalities. Standard Storage Period Archiving. Log for recording power events of the main unit. Log for recording system operations, operator panel operations, and events reported to the operating system. When the input power is turned off, the log is clear. Log for the period from power on to completion of Oracle Solaris OS startup. Log for Active Directory authentication and authorization diagnostic messages.
Log containing a history of the temperature and humidity of the main unit environment. The humidity history is displayed only in the high-end server. The field engineers and authorized service personnel collect the log information.
Also, the system administrator might collect the log information. When the command is executed, all XSCF log information is saved at the specified location. The log can be saved in the device using one of the following two methods.
The following is the procedure for saving logs. Select the snapshot Note menu for saves of the logs menu and display the saving operation page. Set the encryption password used for encrypting the output log file. Execute the data transfer.
When the data transfer is complete, please contact authorized service personnel. Select the snapshot menu for saving the log menu and display the saving operation page. In the window, select the download button and specify the target directory.
Perform the snapshot 8 command using a public key, specifying the target directory, and specifying the encryption password for the output file. The form of the collected log file is as follows. So, the log file cannot be generated in the file name of the user specification. All rights reserved. XCP contains the control programs that configure a computing system.
And the number of domains to be updated is one.
0コメント